AMERICAN LOCK A1100 SERIES

Unless the lock is dirty inside, this will generally cause the actuator and ball bearings to drop out the bottom of the lock. Reassembly is done in reverse order: Ultimate Key Integrity Over 40, key changes available to meet virtually any system design Comply with the one-lock, one-key per employee mantra Master keyed system allows for responsible removal of improperly placed or forgotten lockouts according to your emergency notification policy Keyed Different Each lock is opened by its own unique key which does not open any other lock in the set. American Lock From Lockwiki. Like most American locks, , and series are stamped with a date code. Only the first three characters stamped on the lock body are part of the date code.

Next install the anti-bypass plate optional , the cylinder, trap door and nut. Other options, such as a sash chain, bump-stop cylinder, brass shackle for high corrosion or spark sensitive environments , laser engraving and alternate cylinders are also available by special order from the manufacturer. The , , and series are rekeyable pin-tumbler padlocks made by American Lock. Padlock Labels Add write-on and photo ID labels for easy employee identification. This information was taken from the American Lock Service Manual [1]. If they don’t drop out immediately, gently tap the lock against a hard surface to dislodge the parts. They are sometimes used in environments where a spark-resistant material is required, such as firearm magazines, making them a popular choice for lock-out padlocks. Then, remove the shackle and shackle spring.

Contents 1 American Lock, 1. American Lock, Before installing the retaining screw, test the padlock by holding the trap door and amerixan in place the nut is necessary to allow proper cylinder operation by locking and unlocking the padlock several times. Key X1100 Engrave identification information directly onto key head. When servicing older padlocks that do not have this plate, it is advisable to install them to address this simple but serious security vulnerability.

Steel shackles, amwrican keys and cylinders, as well as our aluminum lock bodies are all manufactured using recycled material. Next install the anti-bypass plate optionalthe cylinder, trap door and nut. Note that while 6-pin models with a “6” in the second last position of the model number utilize the APTC14 cylinders, the APTC12 “5 pin” cylinders are in fact drilled for 6 pins already and can be easily convered by simply adding a 6th pin, driver and spring.

  SOPRANOS EPISODE EVIDENTLY CHICKENTOWN

Reassembly is done in reverse order: Keyed Alike All padlocks wmerican the set are opened by the same key – only one key is necessary to open numerous padlocks.

Retrieved from ” http: All padlocks in the set are opened by the same key – only one key is necessary to open numerous padlocks. Remove this screw, which will release the trap plate at the bottom of the lock and permit the cylinder to be removed.

American Lock Products | Master Lock

Padlock Labels Add write-on and photo ID labels for easy employee identification. These padlocks are powder-coated aluminum and come in a variety of colors. Only the first three characters stamped on the lock body are part of the date code. They are sometimes used in environments where a spark-resistant material is required, such as firearm magazines, making them a popular choice for lock-out padlocks.

If they don’t drop out immediately, gently tap the lock against a hard surface to dislodge amerucan parts. Padlock Tags Engrave brass tags and permanently apply to padlock. Introducing the new S-series Aluminum Safety Padlocks Designed for safety lockout Full customization options Durable to withstand tough environments Look for the UL Environmental claim validation claim mark.

Then, remove the shackle and shackle spring. The, and series are rekeyable pin-tumbler padlocks made by American Lock.

The meaning of any additional characters is unknown. The series number stamped on the back of the padlock identifies the lock body size, the factory-supplied shackle length and the number of loco. When you are confident the lock is operating correctly, install the retaining screw. This information was taken from the American Lock Service Manual [1]. Differentiate your padlocks with a variety of colors, finishes and shackle heights. Like most American locks,and series are stamped with a date code.

Want to learn more about UL Environment?

Personal tools Log in. American Lock Padlocks Pin-tumbler locks. Invert the padlock while holding the shackle in place, and insert the locking balls with some grease, followed by the actuator.

Wide range of color options to match existing safety lockout color systems and even allows for easy identification of multiple types of authorized personnel. Views Page Discussion View source History. Ultimate Key Integrity Over 40, key changes available to meet virtually any system design Comply with the one-lock, one-key per employee mantra Master keyed system allows for responsible removal of improperly placed or forgotten lockouts according to your emergency notification policy Lockk Different Each lock is opened by its own unique key which does not open any other lock in the set.

  SWITCHED AT BIRTH SEASON 1 EPISODE 4 GORILLAVID

American Lock From Lockwiki.

These padlocks are among the most common American brand padlocks found in the United States. Unless the lock is dirty inside, this will generally cause the actuator and ball bearings to drop out the bottom of the lock. Optional cover for enhanced protection Expand to learn more Anodized aluminum finish available in 9 colors Expand to learn more Durable aluminum construction for supreme corrosion resistance.

When it matters

Master Keyed A master key opens all locks within the system while each lock also has its own unique key. To further disassemble the padlock: Visit the UL Environment website! Unlock the padlock and swivel the shackle out of the way, revealing the cylinder retaining screw. After cleaning the disassembled padlock, insert the shackle spring and shackle. Other options, such as a sash chain, bump-stop cylinder, brass shackle for high corrosion or spark sensitive environmentslaser engraving and alternate cylinders are also available by special order from the manufacturer.

The plate takes the form of seeies circular swries disc with a half-moon cutout in it that fits over the actuator.

In newer American Lock padlocks, a bypass restriction plate has been added which prevents the manipulation of the actuator cam with a special tool through the keyway.

American Lock, American Lock, Custom Lock Identification Clearly identify employees and isolation points within your facility Laser Engraving Permanent, durable addition of name, logo, key number or other important information.

A weatherproof cover is available for the and but not the padlocks. Expand to learn more Plated boron alloy shackle Expand to learn more Vibrant baked on powder coated finish available in 6 colors Expand to learn more Durable aluminum construction for supreme corrosion resistance.